Small size rotary model that runs on high-cycle
Product Introduction
Main Features
Ultra-High-Cycle Molding
By separating the plasticization and injection processes, the V-LINE® removes inconsistencies during plasticization weighing and injection, enabling consistent measurement and injection. This enables high cycle rates for the stable molding of small precision components.
Electrically Driven Hybrid Direct-pressure Mold Clamping System
Four tie-bars are used to ensure excellent alignment and high rigidity so that clamping force is applied uniformly. The stable mold closure and clamping ensures that the optimal surface pressure is applied to the mold. This reduces the load on the mold, minimizing mold maintenance and prolonging its life.
Ultra-High-Cycle Molding
A cycle time of just 0.9 seconds is achieved using a mold clamping system that closes and clamps in a single motion coupled with belt-driven table rotation.
(Closure/clamping, table rotation and opening each takes 0.3 sec.)
* With 36 kg applied to 2 surfaces of a female mold and a mold opening/closing stroke of 80 mm
* Equivalent for a dry run
New Function! Cycle Time Chart
The new cycle time chart screen makes the overall molding cycle visible at a glance. This clearly identifies molding operations that could be shortened to reduce time losses. Also it simplifies customization of the cycle settings for each process to increase the cycle rate and enhance productivity.
Product Specifications
| Clamping Unit | ||
|---|---|---|
| Max. clamping force（kN） | 29.4 | |
| Max. mold size（mm） | 180 × 150 | |
| Turntable dimensions（mm） | φ 460 | |
| Daylight（mm） | 300 | |
| Min. mold thickness（mm） | 150 | |
| Ejector stroke（mm） | 30 | |
| Plasticization and Injection Unit | ||
| Screw diameter（mm） | 14 | |
| Plunger diameter（mm） | 8 | 12 |
| Max. injection pressure（MPa） | 197 | |
| Theoretical injection volume（cm3） | 2 | 4.5 |
| Max. injection speed（mm/s） | 500 | 400 |
| Plasticization capacity（kg/h） | 5 | |
| Machine Size·Weight | ||
| Machine size（L×W×H）（mm） | 1625 × 1178 × 2600 | |
| Machine weight（kg） | 1900 | |
| Power input Unit | ||
| Power input specification | AC200V 50/60Hz | |
| NC part | Sodick CNC | |
| Total power capacity（kVA） | 29 | |